CLOSE
Carpet tile Adhesive - Large

Carpet tile Adhesive - Large Safety Flooring

Adhesive- Large
It is designed to provide a permanently tacky film which prevents loose-lay carpet tiles from moving under normal traffic but enables them to be lifted and replaced easily when required. It is non-flammable, is protected against biodegradation, is suitable for use over normal underfloor heating installations, is resistant to plasticiser migration and will withstand normal wet cleaning techniques.
ADHESIVE APPLICATION Using the brush or roller, apply the adhesive evenly to the subfloor, over the whole area to be covered. Allow to dry to a clear, tacky film before placing the carpet tiles in position, pressing firmly from the centre outwards and paying particular attention to the edges. When used over a raised access panel system, the tackifier should be poured into a tray and applied carefully using a roller to avoid excess adhesive seeping between individual panels and achieve the recommended coverage figure.

Coverage with a roller will be 120-240 sqm

Note: Coverage rates will depend on the condition and absorbency of the subfloor and the application pattern

Code: Carpet tile Adhesive - Large

Size: 50 cm x 50 cm / 20 tiles / 5 Sqm per box

Price:
£120.00 Per Item
(£100.00 Ex VAT)

Per Item: 50 cm x 50 cm / 20 tiles / 5 Sqm per box
£100.00
Quantity:
Update cookies preferences